Our 7 barrel fermenter has a 3mm stainless steel inner wall thickness and a 2mm thick stainless steel outer wall thickness. We use tri clamp fittings on all ports including the glycol ports instead of threaded fittings to reduce wear on the ports. By using tri clamp fittings instead of threaded ports you never have to worry about damaging threads and having to hire an expensive TIG welder to repair something that should not fail in the first place. The inside of the tank is polished to a 2n sanitary finish for serious cleanliness. If it is smoother it collects less potential bacteria so we take it to the pharmaceutical level. The shadowless manway is 440mm x 330mm (17.32" x 13") for easy access. We designed all of our fermenters with this same door for ease of cleaning, there is no overhang inside the fermenter for material to hang up on speeding up the cleaning process.
Every single tank goes through a close inspection process by our staff. We do a visual check for any imperfections of the tank and pressurize the glycol ports to check for any leakage inside or outside the tank. We will always stand by our product 100% and provide the best service to our customers.
3mm Inner Tank Wall Thickness
2mm Outer Cooling Shell Thickness
2" Thermal Polyurethane Insulation with both cone and shell coolant jackets
Pressure/Vacuum Relief Valve
Pressure Gage, Liquid Filled
Large Dial Thermometer with a 10" probe
2" Spinning CIP Ball
4" Hop Port
440mm x 330mm Shadowless Manway (Large and Clean)
Tri Clamp Fittings on all ports including Glycol Ports
NPT on temp control thermowell
20 PSI working pressure, Tested to 45 PSI
Internally Polished to 2n Sanitary Finish
All Fermenters are designed for 25% Head Space
4 butterfly valves, outlet, racking arm, cip, blowoff
If you need a custom tank we also can provide them, please contact us directly for more information.
Please call for accurate shipping